12V Battery Powered Lighting Systems

Our solar powered 12V lighting systems are very popular but some people have asked if we can supply a 12V battery powered lighting system without the solar panel.

The non-solar 12V battery powered lighting systems work from a 12V car battery but you will have to re-charge the battery periodically.

If you have a 45 Ah battery in good condition and fully charged you could expect to run the 9W lamp for about 50 hours and the 11W about 40 hours before needing to re-charge the battery.

A 100 Ah battery would similarly enable you to run for 100+ hours before you needed to re-charge the battery.

We provide everything that you will need (including fully detailed installation instructions) to make a safe and simple 12V SELV (safety extra low voltage) lighting system.

The kit contains a factory pre-wired cable harness with the fuse holder, cable connector and insulated crocodile clips connected together. The kit contains a 5A 4-Terminal junction box so that you can easily add more lights and switches. We provide the cable clips to secure the cable safely and make it look neat and tidy.

The non-solar 12V battery powered lighting system is an excellent way to ‘get started’ and to prove that there is sufficient light to do what you need. You can always buy a solar panel later and connect it up to re-charge your battery from daylight to avoid the necessity to re-charge using a battery charger.

Non-Solar 12V Battery Powered Lighting Kit contains:

1 x Light fitting

1 x CFL 12V Lamp

2 x 5m lengths of (1mm² csa : 8.75A) red-black 2-core cable

1 x 12V SELV Light Switch - weather proof to IP54 (1 Pole, 2-Way)

1 x wiring harness c/w in-line fuses, battery clips and connectors

1 x 5Amp 4-Terminal junction box

Cable clips

2 x spare 5Amp fuses

1 x Installation Instructions

Order Code 8745 : 12V Kit with Classic Light & 9W CFL 12V lamp

Order Code 8746 : 12V Kit with Classic Light with Grille & 9W CFL 12V lamp

Order Code 8747 : 12V Kit with Oval Light & 11W CFL 12V lamp

For connection / wiring details please click on the link below.