12V Battery Powered Lighting System - Weatherproof Light c/w 8W T8 Lamp

This non-solar 12V battery powered lighting system with a powerful 18W T8 fluorescent lamp works from a 12V car battery. Using the recommended 110 Ah battery, you could get up to 60+ hours of light before needing to re-charge the battery.

We provide everything that you will need (including fully detailed installation instructions) to make a safe and simple 12V SELV (safety extra low voltage) lighting system.

The kit contains a factory pre-wired cable harness with the fuse holder, cable connector and insulated crocodile clips connected together. The kit contains a 5A 4-Terminal junction box so that you can easily add more lights and switches. We provide the cable clips to secure the cable safely and make it look neat and tidy.

The non-solar 12V battery powered lighting system is an excellent way to ‘get started’ and to prove that there is sufficient light to do what you need. You can always buy a solar panel later and connect it up to re-charge your battery from daylight to avoid the necessity to re-charge using a battery charger.

Non-Solar 12V Battery Powered Lighting Kit contains:

1 x 1P65 rated Weatherproof Light fitting

1 x 18W T8 Fluorescent Lamp

2 x 5m lengths of (1mm2 csa : 8.75A) red-black 2-core cable

1 x 12V SELV Light Switch - weather proof to IP54 (1 Pole, 2-Way)

1 x wiring harness c/w in-line fuses, battery clips and connectors

1 x 5Amp 4-Terminal junction box

Cable clips

2 x spare 5Amp fuses

1 x Installation Instructions

Order Code 8748 : 12V Kit with Weatherproof Light and 18W T8 Lamp

For connection / wiring details please click on the link below

Download 091031_connection_diagram_appendix_4.pdf

For a summary sheet with technical details please click on the link below.

Download 18w_t8_kit_carton_technical_label_01.pdf

For a summary sheet with picture details please click on the link below.

Download 18w_t8_kit_carton_picture_label_01.pdf